M & S GmbH
Maschinen- und Sonderanlagenbau

 Company Profile 
 News 
 Washing Bays 
 Reconstruction 
 Used Washing Bays 
 Accessoires 
 Installations 
 Water Cleaning 
 Spare Parts 
 Stainless Steel 
 Cleaning 
 Partners 
 Contact 
 Imprint 

 German Version 

© M&S GmbH 2008
Installations

Click one of the small photographs to see an enlarged version.

Istallation of a "W400S-3B-HD Model 2007" for company "F.A. Kruse jr." in Brunsbüttel/Germany.







Installation of two WS400 in Belgium.

Type "W-500-3-B HD" installation for MAN Neoman Salzgitter, Germany. Including an osmosis installation.






New service

Since the beginning of 2007 we are also manufacturing washing bays for cars.

Photo: 4 spaces car washing bay, installed in Belgium




3 brushes washing bay "W400-3OB". The mirrors remain at the vehicle (bus) during the wash.





We just installed one of the most modern washing bays for lorries at Oss/The Netherlands for Voss Logisitics (ca. 3.000 lorries). The easy handling and the high quality convinced our customer and set new standards for his other installations.

 



For the Rosenow Truckport Kiel (Germany) we exchanged two existing Kärcher installations with two modern "W400 type 2005" washing bays. One of the installations is equiped with a sidewards high pressure system and a chemical presprinkling bow. Both installations are equiped with remote controls.




Contact: Lars-Uwe Petersen (Director for Washing Bays): 0175-222 95 05



Van Driel- a company with 400 vehicles located in Oss (Netherlands) - exchanged it's old installation with a modern "W400 type 2005" washing bay (including remote control).


Contact: Fred Cornelissen (Garage Director): 0031-0412-67 69 10
Homepage: www.vervoerservicevandriel.nl



Hildesheim tank truckage contractor Laabs has received from us a special installation called W400S washing bay for fueling vehicles. The company's vehicle pool consists of differently-sized tank vessels, the installation is therefore constructed to clean large tanks (Photo 6) as well as standard-size ones (Photo 5). It is the first washing bay of it's kind in Europe.


1
2
3
4


5
6
7
8

1 = Dismantling of the old installation
2 = Assembly of the new one
3 = Preliminary sprinkling
5 = Small tank
6 = Large tank
7 = High pressure rotor head

We just installed Europe's first eight-brush-four-portal washing bay for buses with overhead cable at the Salzburg AG, Austria. It contains a fully automatic recognition of different types of buses by RFID recognition. The driver starts the washing bay from inside his bus. A 18 metres long bus is cleaned within two minutes.

Contact: Dip.-Ing. R. Rattenberger, Telephone: 0043 - 67 68 22 601


Animation
avi-Datei, 83 MB



Washing bay for streetcars in Zürich-Forch, Switzerland

Contact: Jürgen Poschmann (Garage director), Telephone: 0041 43 288 11 88




Special washing bay for concrete elements

The first installation in Europe washing ready-made concrete elements. Made of stainless steel (V4A). The installation is equipped with two brushes, readjusting hydraulically and automatically by performance detection and is fitted with a S7-control (Siemens). Moreover, the installation is equipped with a high-pressure unit to soak the separating agent clinging to the stones. After that, it is washed off by the brushes. At the same time, the high pressure unit is also capable of rinsing. The boards/slabs go through the installation two times, with brushes inversing each time. The last operation comprises the drying of the elements, the installation is fitted with four blowers. The blowers can also mounted on an ordinary washing bay for buses (Photo on the right).

Planning and construction: Jürgen Biehl (M&S GmbH)
Control: Tim Braun (bg-Engineering) 		   







We installed an entire car wash plant for our belgian partner Firotec. The plant is situated in Lommel.

It comprises 2 washing bays:
-One installation overhauled at the plant, it is 18 years old and has been built by J.G.Biehl
-One W400-type installation, year of construction 2005

Technology:
-Water treatment
-High pressure technics at the outside
-Allows underfloor cleanings
-Payment via card charging (Installation is run entirely mechanically)


1
2
3
4


5
6
7
8


9
10

  1 = The two washing bays have been loaded on trucks
  2 = Assembly of the car wash plants in Lommel
  3 = Left: Old washing bay, Right: New one
  5 = Biological water treatment with aeration
  6 = Outer cleaning area
  7 = Outer cleaning area
  9 = Control (18 years old)
10 = Control (2005)



We launched the first 4 brushes drive-through washing bay in Belgium for any kind of vehicles except passenger cars.




Truckage company Thomsen uses at its Güstrow (Germany) branch a W400 type 2005 washing bay to clean their vehicle pool. The W400 type 2005 is the most modern and innovative installation currently on the European market.

If circumstances require it, the installation can also be operated by hand. It is always possible to interfere in the cleaning process and interrupt the washing programme,regardless of its current stage. You just need to press the "Start" button to continue the cleaning process at exactly the same stage.




Haulage contractor Steinmetz in France uses our modern washing bay W400 type 2005.






We installed a W400 type 2004 washing bay for the express company Dirickx in Belgium




We installed a W400 type 2004 washing bay for the company Schenker Logisitk in Schweinfurt, Germany.




We installed a W400 type 2004 washing bay for the express company Oetjen in Rotenburg, Germany.


We launched this 3 brushes W 400 type 2004 washing bay with a special program in Westerland on the island of Sylt, Germany.




We equipped a three-brush washing bay, owned by KVG Bernburg and constructed by another firm ("FWA"), with our latest control.

Contact: Mr. Rößler (Manager), 03471 - 356 90

   




The washing bay at PVG Zeulenrohdam wich was constructed by the firm "k-matic", also was rebuilt with our modern programme.

   



The 18 years old installation you see was equiped with new brush waves. It's located at the express company Fritz in Schwaigern, Germany. The fifth photograph shows the full stainless steel box with control equipment fixed at the installation.

Contact: Mr. Hoffmann (Garage director), 07138 - 97 01 41.






Other installations and support: